SMC Networks SMC8014WN User Manual

錯誤! 尚未定義樣式。
81
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Using the Ping Tool
Using the ping tool, you can check the connectivity between the Gateway and another local
or remote device. The Gateway provides a ping tool for conducting the ping with the default
Gateway, across the RF interface, or across the WAN interface. This tool sends a small
packet of data and then waits for a reply. When you ping a computer IP address and receive
a reply, it confirms that the device is connected to the Gateway.
To perform ping activities, perform the following procedure under Ping on the Diagnostics
menu.
1. In the Ping field, enter the IP address or domain name of a target host.
2. Click the ping button. The results appear in the Diagnostics – Ping Results screen (see
Figure 51). The results screen may flash as the contents refresh during the ping.
3. To close the results screen, click the Back button.
Figure 51. Sample Results for a Ping

SMC Networks SMC8014WN Specifications

General

Brand	SMC Networks
Model	SMC8014WN
Category	Gateway
Language	English