錯誤! 尚未定義樣式。
77
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
2. In the Gateway Config Filename field, enter the name of the configuration file.
3. If one or more scripts appear to the left of the Restore button, select the script you want to
restore. (running) appears next to the script that is currently running.
4. Click the Restore button. The message in Figure 46 appears.
5. Click OK to override the Gateway’s current configuration with the one in the configuration
file or click No to not restore the configuration from the file.
Restoring Factory Defaults
One way to restore the Gateway’s factory default settings is to use the Reset switch on the
Gateway’s rear panel (see “Restoring Factory Defaults” on page 15). Another way is to use
the Configuration Tools menu to power-cycle the Gateway.
Note: Rebooting the Gateway removes any customized overrides you made to the
default settings. To reboot the Gateway and retain any customized settings, use
the Reboot menu (see “Reboot Menu“ on page 79).
1. Under Restore to Factory Defaults, click Factory Reset. The warning message in Figure
47 appears.
2. Click OK to restore the Gateway’s factory default settings or click Cancel to retain the
Gateway’s current settings.
To Next Page
Loading...
