錯誤! 尚未定義樣式。
43
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
WAN Settings Menu
Path: WAN
The Gateway can connect to the cable service provider using either a static IP address or an
IP address automatically assigned by a Dynamic Host Configuration Protocol (DHCP) server.
Using the WAN Settings menu, you can assign your own static WAN IP and DNS addresses
to the Gateway. By default, both options are disabled, allowing the Gateway to obtain these
settings automatically from a DHCP server.
Figure 24. WAN Settings Menu
To Next Page
Loading...
