SMC Networks SMC8014WN User Manual

錯誤! 尚未定義樣式。
60
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Table 15. Predefined Filter Menu Options
Option Description
Service List of predefined services you can choose.
LAN IPs Select whether you want to apply the predefined filter to any LAN IP address, a single LAN IP
address, or a range of LAN IP addresses.
Start IP If LAN IPs is set to Single address or Address Range, enter the starting local IP address.
End IP If LAN IPs is set to Address Range, enter the last two octets in the ending local IP address.
Adding Customer-Defined Filters
The Gateway lets you add customer-defined filters that block certain types of traffic from the
LAN side of the Gateway to the Internet side of the Gateway.
1. In the Access Control menu, check Enable Access Control if it is not checked and click
the Apply button. The remaining fields in the menu become available.
2. Under Customer Defined Filtering Table, click the Add button. The Customer Defined
Filter menu appears (see Figure 35).
3. Complete the fields in the Customer Defined Filter menu (see Table 16).
4. Click Apply. (Or click Back to return to the Access Control menu or Cancel to cancel any
selections you made.) If you clicked Apply, the customer-defined filter is added to the
Customer Defined Filtering Table on the Access Control menu.
5. To define additional filters for access control (up to 35, including predefined filters), repeat
steps 1 through 4. When you finish, click Apply in the Access Control menu to save your
settings.
6. To change the settings for a customer-defined filter, click the radio button to the left of the
filter in the Customer Defined Filtering Table and click the Edit button. When the
Customer Defined Filter menu appears, edit the settings as necessary (see Table 16) and
click Apply. Click Apply in the Access Control menu to save your settings.
7. To delete a customer-defined filter, click the radio button to the left of the filter in the
Customer Defined Filtering Table and click the Delete button. No precautionary
message appears before you delete a customer-defined filter. Click Apply in the Access
Control menu to save your settings.

SMC Networks SMC8014WN Specifications

General

Brand	SMC Networks
Model	SMC8014WN
Category	Gateway
Language	English