錯誤! 尚未定義樣式。
88
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Caution: Before drilling holes, check the structure for potential damage to water, gas, or
electrical lines.
1. Drill the holes to a depth of at least 1 inch (25 mm). There must be 0.5 inches
(10mm) between the wall and the underside of the screw head.
2. After mounting, reconnect the coaxial cable and re-plug the power cord.
3. Route the cables properly to avoid safety hazards.
To Next Page
Loading...
