SMC Networks SMCGS24C-Smart User Manual (English)

Questions and Answers:

K
Kathy SmithJul 31, 2025
What to do if the Link LED is off on my SMC Networks SMCGS24C-Smart?
- E
  Elizabeth ShannonJul 31, 2025
  To troubleshoot a Link LED that is off on your SMC Networks Switch: * First, make sure that both the switch and the device connected to it are turned on. * Ensure the cable is securely plugged into both the switch and the device. * If the switch is in a rack, check the connections to the punch-down block and patch panel. * Confirm that you're using the correct type of cable and that it's not longer than the specified limit. * Inspect the adapter on the connected device and the cable connections for any signs of damage. If you find a defective adapter or cable, replace it.
C
Charles ObrienAug 8, 2025
How to fix a Power LED that is off on an SMC Networks SMCGS24C-Smart Switch?
- F
  fcraigAug 8, 2025
  If the Power LED on your SMC Networks Switch is off, check the connections between the switch, the power cord, and the wall outlet. If the problem persists, contact your dealer or SMC Technical Support for assistance.
A
Alyssa GrimesAug 15, 2025
Why does my SMC Networks Switch power off after running for a while?
- T
  tiffany35Aug 15, 2025
  If your SMC Networks Switch powers off after running for a while, first verify that the fans on the unit are unobstructed and running before it shuts down. The issue might also be due to loose power connections, power losses or surges at the power outlet, or a defective internal power supply. If you still cannot isolate the problem, then the internal power supply may be defective.
J
Johnny GreerAug 22, 2025
What to do if the power indicator does not turn on for SMC Networks SMCGS24C-Smart Switch?
- S
  Sara Reyes MDAug 22, 2025
  If the power indicator on your SMC Networks Switch doesn't turn on, check for loose power connections, power losses, or surges at the power outlet. The issue could be related to the power outlet itself, the power cord, or the internal power supply.

SMC Networks SMCGS24C-Smart Specifications

General

Ports	24
Layer	Layer 2
Switching Capacity	48 Gbps
MAC Address Table	8K
Forwarding Rate	35.7 Mpps
Jumbo Frame Support	Yes
Packet Buffer Memory	512 KB
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 90% (non-condensing)
Power Consumption	20W
Jumbo Frame Size	9216 Bytes
Management	Web-based management
Features	QoS, VLAN, IGMP Snooping, Port Mirroring
Storage Temperature	-40°C to 70°C