SMC Networks SMCGS24C-Smart User Manual

N ETWORK P LANNING
2-6
Application Notes
1. Full-duplex operation only applies to point-to-point access (such as
when a switch is attached to a workstation, server or another switch).
When the switch is connected to a hub, both devices must operate in
half-duplex mode.
2. For network applications that require routing between dissimilar
network types, you can attach the switch directly to a multi-protocol
router.
3. As a general rule, the length of fiber optic cable for a single switched
link should not exceed:
• 1000BASE-SX: 550 m (1805 ft) for multimode fiber
• 1000BASE-LX: 5 km (3.1 miles) for single-mode fiber
• 1000BASE-ZX: 100 km (62.1 miles) for single-mode fiber
However, power budget constraints must also be considered when
calculating the maximum cable length for your specific environment.

SMC Networks SMCGS24C-Smart Specifications

General

Ports	24
Layer	Layer 2
Switching Capacity	48 Gbps
MAC Address Table	8K
Forwarding Rate	35.7 Mpps
Jumbo Frame Support	Yes
Packet Buffer Memory	512 KB
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 90% (non-condensing)
Power Consumption	20W
Jumbo Frame Size	9216 Bytes
Management	Web-based management
Features	QoS, VLAN, IGMP Snooping, Port Mirroring
Storage Temperature	-40°C to 70°C