To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if I forgot the password for my SMC Networks Wireless Access Point or it has locked up?
If you've forgotten your password or your SMC Networks Wireless Access Point has locked up, use a pin to push the RELOAD button for over 8 seconds. This button is located on the bottom of the device. The device will then load and restart with the factory default settings.
What to do if the management utility cannot connect to the SMC Networks Wireless Access Point?
If the management utility cannot connect to your SMC Networks Wireless Access Point, check that your local IP address settings conform to the device's settings.
General| Device Type | Wireless router |
|---|---|
| Frequency Band | 2.4 GHz |
| Antenna Type | External |
| Connectivity Technology | Wireless |
| Data Transfer Rate | 54 Mbps |
| Wireless Standards | IEEE 802.11b, IEEE 802.11g |
| WAN Ports | 1 x 10/100Base-TX WAN |
| Security | WEP, WPA, WPA2 |
| Antenna | 2 |
| Ports | 4 x 10/100Base-TX LAN |
Lists all the items included in the EZ Connect g 108 Mbps Wireless AP package.
Details physical components, indicators, and system prerequisites for the Wireless AP.
Provides step-by-step instructions for installing the Wireless AP.
Explains initial setup, EZ Installation Wizard, and IPCONFIG utility.
Guides users to configure IP addresses for Windows 2000 and Windows XP.
Covers browser setup, proxy settings, interface navigation, and login procedures.
Configures AP operational mode, network name, channel, and verifies settings.
Monitors AP status and configures LAN, WAN, wireless parameters including SSID and channel.
Manages wireless security, including encryption (WEP, WPA/WPA2) and MAC address filtering.
Covers AP maintenance, firmware updates, system resets, and password management.
Explains network topologies, ad hoc/infrastructure modes, and wireless LAN with internet access.
