SMC Networks ZSE20A

-15-
No.PS※※-OMU0003-C
Mounting and Installation
■Installation
○Mounting with bracket
●Mount the bracket to the body with mounting screws (Self tapping screws: Nominal size 3 x 8L (2 pcs)),
then set the body to the specified position.
: Tighten the bracket mounting screws to a torque of 0.5±0.05 Nm.
Self tapping screws are used, and should not be re-used several times.
•Bracket A (Part No.: ZS-46-A1)
•Bracket B (Part No.: ZS-46-A2)