SMC Networks ZSE20A User Manual

-36-
No.PS※※-OMU0003-C
■[F 3] Digital filter setting
The Digital filter can be selected to filter the pressure measurement.
Output chattering or flicker in the measurement mode display can be reduced by setting the digital filter.
<Operation>
Press the or button in function selection mode to display [F 3].
Press the button. Move on to digital filter setting.
Press the button to set. Return to function selection mode.
[F 3] Digital filter setting completed
1: Each set value is a guideline for 90% response time.
2: Both the switch output and pressure display are affected. When only switch output needs to be affected, select the delay
time setting (page 26, 32 and 35).
Digital filter setting
Press the or button to select the digital filter.

SMC Networks ZSE20A Specifications

General

Brand	SMC Networks
Model	ZSE20A
Category	Switch
Language	English