SMC Networks ZSE20A

-59-
No.PS※※-OMU0003-C
[n] (Normal
output) is
selected
Press the
button
to set.
Return to
function
selection mode.
Press the
button to return to
[n](normal output),
then press the
button to set.
Return to function
selection mode.
Press the button
for 2 second or longer.
[F98] Output check completed Measurement mode
: Measurement mode can return from any setting item by pressing the button for 2 seconds or longer.
OUT2 output check
Press the or button to select OUT2
output check.