SMC Networks ZSE20A

-67-
No.PS※※-OMU0003-C
Buttons do not work.
There is noise.
The body of the
pressure switch has
become loose.
There are differences
in the displayed values
when using more than
one pressure switch.
Refer to Trouble No.8
Displayed value is not
correct
Refer to Trouble No.9
Refer to Trouble No.9
Refer to Trouble No.11
Refer to Trouble No.14
Refer to Trouble No.13
Refer to Trouble No.15
Refer to Trouble No.16
The display is missing.
Refer to Trouble No.19
Refer to Trouble No.10
The display accuracy
does not meet the
specifications.
Refer to Trouble No.12
The display is
unstable.
The display turns OFF.
Display flashes.
The Display
measurement unit
cannot be changed.
Refer to Trouble No.17
Copy function error.
Refer to Trouble No.18
Copy error [Er13] is
displayed on the slave
side pressure switch.
Not able to copy.