SMC Networks ZSE20B-L User Manual

-51-
No.PS※※-OMV0006-D
Security code changing
Press the
or button to input the changed
security code on the main display.
∗
For instructions on how to enter the security code,
refer to "How to input and change the security code"
on page 61.
After entry, the changed security code will flash by
pressing the
button for 1 second.
(At this point, the changing of the security code is not
completed)
Return to the change of setting again by pressing the
or button.
Press the
button to set. Return to function selection mode.
[F81] Security code completed
If the security code function is enabled, it is will be necessary to input a security code to release the
key-lock.
∗: If a key is not pressed for 30 seconds while entering the security code, function selection mode will return.

SMC Networks ZSE20B-L Specifications

General

Brand	SMC Networks
Model	ZSE20B-L
Category	Switch
Language	English