To Next Page

To Previous Page

-50-

No.PS※※-OMV0006-D

■[F81] Security code

The security code can be turned on or off and the security code can be changed when unlocked.

Press the

or button in function selection mode to display [F81].

Press the

button. Move on to security code.

Security code checking

Press the

or button to input the

security code on the sub display (right).

(The default setting is [000].)

∗

For instructions on how to enter the security code, refer to "How to input

and change the security code" on page 61.

If the security code entered is incorrect, [FAL] will be displayed, and the

security code must be entered again.

If the wrong security code is entered 3 times, [nG] is displayed and the

device returns to function selection mode.

Security code

Press the or button to select the setting of security code.

[oFF] (not use) is

selected

Press the

button to return to

function selection

mode.

[on] (use) is selected

Press the button to set.

Move on to security code checking.

Press the button for

1 second to set.

Move on to security code changing.

SMC Networks ZSE20B-L User Manual

Questions and Answers: