SMC Networks ZSE20B-L User Manual

-30-
No.PS※※-OMV0006-D
■[F 0] Display units, switch output specifications and diagnostic information selection function
This setting is only available for models with the units selection function.
The unit that can be displayed is different depending on the pressure range.
(kPa/MPa can still be selected if the product does not have the units selection function.)
<Operation>
Press the
or button in function selection mode to display [F 0].
Press the
button. Move on to display unit selection.
Press the
button to set.
Press the
button to set. Move to the setting of diagnostic information selection.
Display unit selection
Press the or button to select the display unit.
Switching setting of switch output NPN/PNP specifications
The switch output of this product can be switched to NPN or PNP output in accordance with
the user device construction.
Press the
or button to select switch output specification.
Move on to the switching setting of
switch output NPN/PNP specifications.

SMC Networks ZSE20B-L Specifications

General

Brand	SMC Networks
Model	ZSE20B-L
Category	Switch
Language	English