2-6
Analyzer Screen Display Features
Test Menu
This section details menu selection items and their submenus.
Using the arrow keys (
), move to the Home icon and
press ENTER. The Test Menu displays as shown
Figure 2-5
.
✓
This section contains a complete description of each test
function shown in
Figure 2-5
.
1. Typical TSI Procedure
A preprogrammed idle test sequence can be performed at idle and
high speed with or without RPM.
✓
Additional detail procedures for this test are found in
Chapter 3–Vehicle Testing
.
2. Catalytic Efficiency Test
A preprogrammed special test procedure to determine how well a
catalytic converter is functioning.
✓
Detail procedures are found in
Chapter 3–Vehicle
Tes ting
.
✓
Optional Catalytic Converter Test Kit, part number
EAKO232L00A, is recommended to perform this test
procedure. Instructions for this kit are in
Chapter 3–
Vehicle Testing
.
3. Maintenance
Use the down arrow (
) and press ENTER or select number 3 to
do the following checks on the analyzer. Use the up/down arrow
and the right arrow to select the required check. For more
information on maintenance, refer to
Chapter 4–Maintenance
.
Figure 2-5
: Menu
To Next Page
Loading...