3-10
Vehicle Testing
12. Follow the screen prompts.
✓
Note the test can be done without RPM or oil temperature
by pressing the ENTER with the
arrow key.
13. When the display reads BRING RPM INTO WINDOW,
depress the accelerator pedal to increase engine speed to
the desired speed. The Typical TSI Test Screen provides a
graph that shows the engine speed in RPM.
14. Hold engine at that speed for the duration of the test. The
countdown timer on the TSI Test Screen shows the
seconds remaining for the test.
15. When the test is complete, stop the engine and remove the
sample probe.
16. The Results Screen displays followed by a display of the
actual gas values.
17. The Customer Information Screen displays. Fill in the
information as desired. Press ENTER when prompted to
print a report.
✓
To skip printing, select ESC and then either (
)
Repeat or the Home to abort.
To Next Page
Loading...