Specifications
Head Type
Square drive 72 or 80 teeth, sealed fixed ratchet
J, Y, X and Z-Shank Female Type
ISO
Display
DISPLAY TYPE: Dot Matrix LCD (192 x 65 Resolution)
VIEWING DIRECTION: 6:00
BACKLIGHT: WHITE (LED)
Sealed Button Pad
POWER - ON/OFF and torque and angle re-zero
ENTER - Measurement mode select and menu entry
UP – Increments torque and angle settings and menu navigation
DOWN - Decrements torque and angle settings and menu navigation
UNITS - Units select (ft-lbs, in-lbs, Nm, Kgm, Kg-cm, dNm) and enter PSET (preset) menu
LCD BACKLIGHT – Illuminates all screens and last peak torque or angle recall
Functions
The intended use of the CTECH LINK torque wrench is to be used with the CONTROL LINK and indoor use.
Not intended for use in wet locations.
Set - torque or angle target
Track - real time display of torque or accumulated angular rotation with progress lights
Peak Hold – 5 sec. flashing of peak torque or alternating peak torque/angle on release of torque
Peak Recall - display last peak torque or peak torque/angle on button press
Memory - display of last 1500 peak torque or peak torque/angle readings
Accuracy
Temperature: @ 22 C (72°F)
Angle: ±1% of reading ±1° @ angular velocity > 10°/sec < 180°/sec
CW CCW
Torque: ±2% ±3% of reading, 20% to 100% of full scale
(unflexed) ±4% ±6% of reading, 5% to 19% of full scale
Dimensions: Length / Weight/Drive
Preset Range
ANGLE: 0 to 360° CW or CCW (Display Resolution 1°)
TORQUE: (Display Range and Resolution as shown below)
Environmental Parameters: Clause 1.4 of IEC610101: (For use in Pollution Degree 2 Environments).
Altitude: Up to 2000 meters
Operating Temperature: 0°F - 130°F (-18°C to 54°C)
Storage Temperature: 0°F to 130°F (-18°C to 54°C)
Measurement Drift: ANGLE: -0.12 Angular Degrees per Degree C TORQUE: +0.01% of reading per Degree C
Humidity: Up to 90% non-condensing
Battery: Three "AA" Lithium Cell (L91-FR6-1.5V), up to 80 hours continuous operation
(Three "AAA" for 240 models, up to 60 hours continuous operation)
Default Auto Shut-off: After 2 minutes idle – (Adjustable, see Advanced Settings)
To Next Page
Loading...
Need help?
General
