38
Expert Tips / Demo Expert Tips
Figure 7-2 Expert Tips Icon
3. Use the Up / Down control buttons to select a system, then press the Y button to open the
menu.
i Press the N button at anytime to go back to the last menu.
4. Select an option from the component menu (Figure 7-3), then press the Y button to view the
selection results. Additional sub-menu selections may be required depending on the
selection.
Figure 7-3 Component Menu
5. Results are displayed (Figure 7-4). Use the Up / Down control buttons to scroll through the
results. The results are identified as:
•Know Good - indicates the thermal image or video clip shown represents a known good
component, for comparison
•Known Bad - indicates the thermal image or video clip shown represents a known bad
component, for comparison
•Tip - displays a general troubleshooting tip about the system or component
To Next Page
Loading...