21
Navigation M2 Data Acquisition Device Controls and Features
4.2.2 Soft Keys
The eight soft keys located above the rotary dial on the M2 unit are used to initiate a variety of
additional functions while performing meter tests. The functionality of the soft keys varies
according to what type of tests are being performed, as determined by the position of the rotary
switch. Some of the soft keys do not function for certain test modes. Refer to "M2 Data Acquisition
Device‚" on page 67 for additional information.
In general,
a short or momentary push of a soft key activates the assigned function, a long push returns to
the normal display.
To Next Page
Loading...
Need help?
General
