99
Scope Multimeter Operations Operations
Graphing Multimeter Options
The following options are available for testing:
• Single Graphing Meter
• Volts DC
• Volts AC RMS
• Frequency
• Pulse Width
• Duty Cycle
• Ohms
• Low Amps (20)
• Low Amps (40)
• 100 PSI Vacuum
• 100 PSI Pressure
• 500 PSI Pressure
• 5000 PSI Pressure
Digital Multimeter Options
The following options are available for testing:
• Volts DC
• Volts AC RMS
• Ohms
• Diode/Continuity
• Capacitance
• Low Amps (20)
• Low Amps (40)
Presets
Presets are the personal meter settings that you have saved.
9.2.2 Scope and Multimeter Setup
The following sections explain how to adjust the scope and multimeter for the specific type of
signal being sampled. Most of these setup operations are available from the toolbar.
Trace Controls
The Traces controls are used to adjust individual characteristics of how the signal is sampled and
displayed for each trace. The more commonly used trace settings can also be made from the
Trace Details area of the touch screen (see "Trace Details‚" on page 95). Trace Details offers a
shortcut to some of the operations described in the following sections.
To Next Page
Loading...
Need help?
General
