This section describes the functions of the phone with the factory default
settings. If your phone was installed and/or set up by someone else, the
default settings may have been changed. Please check with that person or
company if the phone does not react as described here.
The caller information displayed on the screen is controlled by the setting on
the phone‘s web interface > Preferences > General Information > Number
Display Style > drop-down list (full contact, name, number, name and number,
number and name). The default setting is "Name".
See "Entering Letters, Numerals, and Special Characters" on page 16 for input
modes and entering letters, numerals, and special characters. Selecting
an identity for outgoing calls: See "Outgoing identities" on page 22. See
"Identities/Accounts" on page 65 on how to configure identities.
Selecting Identity for Current Outgoing Call
If more than one identity is shown on the display, the one with the checkmark
is the outgoing identity for the call and the number/name that will show on the
callee’s phone. Select a different identity by Tapping the identity's button.
Note: See "Outgoing Identities" on page 42 on how to assign a
fixed outgoing identity to calls being made to a certain number.
The outgoing number will only be used automatically when the
call is initiated from the phone book!
Using Different Audio Devices
From the idle screen pressing a key on the alphanumeric keypad opens the
"Enter number" screen with the text field in numeral input mode.
• Pick up handset, enter number, and tap context area or press .
• or enter number and pick up handset.
1. Press to switch to headset mode.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
