© 2009 snom technology AG
man_snom870_v101_en
66
snom 870 User Manual
Customizing Phone Settings
identity will open; it contains four tabs, with the left one, Login, visible in the
front.
Enter the information received from your provider or your administrator in the
appropriate fields.
• The display name is optional and freely selectable. It will be sent to any
parties you call unless you hide your identity (see "Hide own Identity" on
page 73). If you do not enter a display name, the data in the "Account" text
field will be shown on your display and sent to any parties you call unless
you hide your identity.
• Any text you enter in "Display text for idle screen" will be shown - instead
of your display name or account - on your display only. It will not be
sent to any parties you call.
• You can choose one of 10 built-in ringtones or a custom melody, or turn off
the ringer by selecting "Silent".
Select a ringer from the ringtone drop-down list of Login > Ringtone and
click on "Play Ringer". The tone will be played by your phone.
If you have selected the custom melody, enter the URL to the data file in
the text field underneath. It must be a file of the type PCM 8 kHz 16 bit/
sample (linear) mono WAV.
Click on "Re-Register" and "Save".
Please note: The ringer set for a contact type overrides the ringer
for a particular identity; in case of a conflict the phone will use
the contact type ringer. If your ringtones don’t seem to work as
expected, contact your administrator. There may be an overriding
setting on the PBX.
Automatic acceptance of incoming calls
1. Setting: Identity # > SIP tab > Auto Answer >
2. Select audio device (handsfree, handset, headset) for automatic
acceptance: Preferences > Auto Answer > Type of Answering > pull-
down list > Save
3. If you wish to be alerted acoustically whenever the phone accepts a call
automatically: Preferences > Auto Answer > Auto Answer Indication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
