Snom D345 - Page 28

28
D345 User Manual Getting to Know Your Phone
◦ The warnings "HTTP Password not set" and "Admin Password not set". They can be turned o
by either setting the passwords or turning them o manually.
Deleting or temporarily suppressing status messages:
◦ Messages will be deleted automatically when the underlying cause is removed, i.e., call
forwarding is turned o, HTTP password is set, etc.
◦ Temporarily suppressing messages: Press
, if the button is available, or >
Information > 1 Status info to open the "Status info" screen. Use / to select an item from
the list. Press
to view details of the selected item, if available; press to delete the
selected item.
Context area: Configured identities.
Outgoing identity
• The current outgoing identity is indicated by a black phone symbol and the
extension number or name. If there is more than one active identity, the black
phone symbol is preceded by an arrow:
. When you call someone, this
is your identity for the call.
• Select a dierent identity for the next call by pressing
/ on the navigation key.
Active identity
• An active identity that is not the current outgoing identity is indicated by a white
phone symbol.
• Can be called
• Can be selected as the outgoing identity for making calls by pressing
/ on the
navigation key
X
Identity not properly registered
Note: Identities can be deactivated without removing the registration settings by
changing their status to "inactive" on the phone's web interface. Inactive identities are
not displayed on the idle screen. They cannot be called or selected as the outgoing
identity. To deactivate the identity, open the phone's web interface > Configuration
Identity (1-12).
1. Change the "Identity active" setting to o.
2. Click on Re-Register.
3. Click on Save.
For information on configuring new identities or modifying existing ones, see "Identities/accounts" on
page 73.
Function key line
The symbols on the buttons in this line depict the functions that can be activated by pressing the
function key underneath the respective symbol. See "Appendix 1 - Display Symbols and Icons" on
page 89 for a complete list. The factory defaults are: