Snom D345 - Conference; Initiating a Conference; Conference Screen Navigation

56
D345 User Manual Using the Phone
• When the connected call is on-screen, you can transfer it to a third party or terminate it by
pressing
.
• When a held call is on-screen, press
to connect to it and put the currently connected call on
hold.
Conference
The maximum number of participants is three.
Initiating a conference
1. Call the first intended participant and put him or her on hold.
2. Call the second intended participant and put him or her on hold.
Fig. 1
3. Press to start the conference.
Conference screen navigation
Your input on the phone's keys will aect the caller/callee(s) or the entire conference shown in the
contact area of the display.
Example: A conference with three participants, including yourself. After you have pressed
(Fig. 1)
to start the conference, the names, if available, or phone numbers of the other participants are shown
on-screen (Fig. 2 - 4).
Fig. 2 Fig. 3 Fig. 4
• Selecting individual participants. Press the up or down arrows / on the navigation key to
select one of the participants or the conference. The selected item is indicated by the arrow
preceding the symbol indicating the conference or one of the participants, respectively:
Conference
157
7899
• Talking to one participant in private. With one of the participants on-screen selected by the
preceding arrow
(Fig. 3 and 4), press to converse with that participant in private and to put
the other party on hold.
To restart the conference, press
to put the connected party on hold again, then press .