65
D345 User Manual Using the Phone
Turning forwarding of all calls on/o with a programmable function key
Turning call forwarding on
NOTE: Call forwarding is set for each configured identity separately. When the setting
is done on the phone, it applies to the identity selected as outgoing identity.
1. Press
. The display will show the Target when Forwarding screen.
Note: If the function key
is not available when the display is in idle mode, you can
make it available on the Function Keys page of the phone's web interface. For further
information see "Configuring the function keys" on page 66. Default settings: See "At
a glance" on page 19.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press
. The symbol now is crossed o:
.
Turning call forwarding o
Press the function key underneath
.
To Next Page
Loading...
