Snom D345 - Page 34

34
D345 User Manual Getting to Know Your Phone
1. Press .
2. Press 1 Preferences (see Fig. 1 on page 32).
3. Press 5 Display.
4. Press 6 Expansion Modules.
Fig. 8
5. Press 1 Appearance.
Fig. 9 Fig. 10 Fig. 11
6. Press 1, 2, or 3 to change and simultaneously save the display layout of the first, second, or
third connected D3 expansion module, respectively, from lines to tiles and vice versa
(Fig. 10 and 11), or scroll to the respective setting and press
.
7. Press
to return to the Expansion modules menu (Fig. 9); press for approx. 3 seconds to
return to the idle screen.
• Font size. As of FW version 8.9.3, it is possible to adjust the font size for the connected expansion
modules. The size is set separately for line and tile layout, and the respective setting is applied to
all connected modules with line or tile layout, respectively.
1. Press
.
2. Press 1 Preferences (see Fig. 1 on page 32).
3. Press 5 Display.
4. Press 6 Expansion Modules.
5. Press 2 or 3 to select the font size setting for line or tile layout, respectively (Fig. 9).
6. Use the alphanumeric keypad to enter the font size (Fig. 12 and 13). Press the function key
underneath
to delete the character to the left of the cursor.
7. Press
to save the setting and to return to the Expansion modules menu (Fig. 9).
Fig. 12 Fig. 13
• Intensity of backlight. The setting is applied to all D3 expansion modules connected to the phone.
1. Press
.
2. Press 1 Preferences (see Fig. 1 on page 32).
3. Press 5 Display.