Snom D345 - Page 80

80
D345 User Manual Customizing the Phone Settings
After timeout
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding
time". If the call has not been accepted by the end of this time period, it is forwarded to the number of
the phone, extension, or mailbox specified as this function's target
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding
time". If the call has not been accepted by the end of this time period, it is forwarded to the number of
the phone, extension, or mailbox specified as this function's target.
Configuring the settings on the phone
See "Making/changing the settings on the phone and turning on call forwarding" on page 63 . The
settings apply to all identies configured on the phone.
Configuring the settings on the web interface
If your internet telephony provider or your PBX uses codes to turn functions on and o, refer to their
manuals for the codes to enter in "On Code"/"O Code" text fields or ask your administrator.
Setting forwarding numbers
• Forwarding all incoming calls:
1. Open Configuration Identity > Features tab > Call Forwarding > Always.
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on "Apply" and "Save".
• Forwarding incoming calls when the phone is busy:
1. Open Configuration Identity > Features tab > Call Forwarding > Busy .
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on "Apply" and "Save".
• Forwarding incoming calls when they are not answered:
1. Open Configuration Identity > Features tab > Call Forwarding > Timeout.
2. Type the number of seconds into the text field of "Timeout (sec)". If an incoming call hasn't
been answered when the time has elapsed, the call will be forwarded to the phone number
entered as target.
3. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
4. Click on "Apply" and "Save".