UPS/NTA GB/DELMP_EXPC1C3C6_B page 1/48
Certificate of Warranty
The warranty conditions are stipulated in the sales contract, if not the following points shall
apply.
The manufacturer exclusively guarantees his own products against any defect in
construction or operation arising from faulty design, materials or workmanship according to
the conditions set down below.
The manufacturer, at his discretion, is entitled to adapt his product in order to comply with
the warranty or replace the faulty parts. The manufacturer’s warranty does not apply in the
following cases:
- Defects arising either from designs or parts imposed or supplied by the Purchaser.
- Failure due to fortuitous circumstances or force majeure.
- Replacements or repairs resulting from normal wear of units and machinery,
- Damage or injuries caused by negligence, lack of inspection or maintenance, or improper
use of the products.
The period of validity of the warranty may never exceed 12 months after delivery.
Replacements, repairs or modifications of parts during the warranty period cannot extend
the duration of the warranty.
For these stipulations to be valid, the Purchaser must, within a maximum of 8 days beyond
which the warranty lapses, expressly inform the Manufacturer of the faulty design, or the
material or manufacturing defect, stating in detail the grounds for his complaint.
Defective parts replaced free of charge by the Manufacturer are to be put at his disposal, so
that he may become the sole owner.
The warranty legally ceases if the Purchaser has, of his own initiative, undertaken
modifications or repairs on the Manufacturer’s products without the written consent of the
latter.
The Manufacturer’s liability is limited to the obligations as defined herein (repair or
replacement), all other items of damage being formally excluded.
The Purchaser is liable for taxes or duties of any kind in compliance with either the
European regulations, or those of the country of import or transit.
To Next Page
Loading...
Need help?
General