To Next Page

To Previous Page

ENGLISH

MASTERYS BC 60-80 kVA - Ref.: IOMMASBCXX06-EN 06

5. MIMIC PANEL

CIM Alarms Code menu

This displays the service code to be sent to the support service to make an accurate and rapid diagnosis of the possible failure.

In the event of a fault, select the menu SERVICE > CIM ALARMS CODE and inform the support centre of the code displayed.

ALARMS CODE 1/2

1) 0000 2) 0000

ALARMS CODE 2/2

3) 0000 4) 0000

Warranty Code menu

During equipment commissioning, a warranty activation code, comprising four characters, is required to complete the start-up

procedure.

5.3 WARRANTY CODE

COMMISSIONING

The activation code is provided directly by the reference Support Centre upon communication of the equipment serial number

which is displayed in the next message by pressing ENTER.

WARRANTY CODE

SN: 0000000000

Inserting the code does not limit the availability of equipment functionality.

When the Support Centre is contacted for the activation code, detailed information can be obtained on the UPS functions available

and regular routine maintenance programmes.

Once the code is obtained, enter it by pressing ENTER to activate the entry (two asterisks will appear). Select the first character

with the

and keys and confirm with ENTER to accept the character. Then move on to the next character. Pressing the

ENTER key after selecting the fourth character activates the code.

WARRANTY CODE

CODE - - - -

An error message is displayed if the code is incorrect. Check that the code displayed corresponds to the code provided by the

Support Centre and repeat the procedure.

socomec MASTERYS BC 80 User Manual

Questions and Answers: