What does BMS OVP mean on Sofar solar 3KTLM-G3?
If you encounter a 'BMS OVP' error on your Sofar solar Inverter, first close both the inverter and the lithium battery. Wait for 5 minutes, then reopen them. If the problem continues, it may indicate an internal failure of the lithium battery, and you should contact technical support for assistance.
General| Model | 3KTLM-G3 |
|---|---|
| Type | Grid-tied Inverter |
| Rated Output Power | 3000 W |
| Max. DC Input Power | 4500 W |
| Max. DC Input Voltage | 600 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 11 A |
| Max. AC Apparent Power | 3300VA |
| Rated Grid Voltage | 230 V |
| Grid Voltage Range | 180-280 V |
| Rated Grid Frequency | 50/60 Hz |
| THDi | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| European Efficiency | 97.0% |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485 |
| Humidity Range | 0-100% |
| Power Factor | >0.99 (Adjustable) |
Describes the purpose and content of the user manual.
Lists the specific SOFAR 3K~6KTLM-G3 inverter models covered.
Identifies the intended audience for the manual.
Introduces safety symbols and their meanings within the manual.
Provides essential safety guidelines for operating the equipment.
Explains various safety symbols and their meanings.
Details the physical size and measurements of the inverter.
Explains how the inverter functions and its internal modules.
Presents graphical data on the inverter's efficiency performance.
Controls inverter on/off via external signals.
Discusses the inverter's reactive power output capabilities.
Explains active power limitation features.
Describes frequency-based power adjustment for grid stability.
Covers remote monitoring via communication systems.
Details methods for updating inverter software.
Provides critical safety warnings before proceeding with installation.
Outlines the step-by-step installation procedure for the inverter.
Introduces the scope of the electrical connection section.
Ensures all safety checks are performed prior to inverter startup.
Step-by-step guide on how to power on the inverter.
Describes the physical interface elements: display and buttons.
Procedures for identifying and solving common inverter problems.
Instructions for cleaning the inverter unit safely.
Guidance on cleaning the inverter's heat sink for proper ventilation.
Details on the DC input specifications for the inverter.
Lists the specific products covered under the warranty terms.
Defines key terms used within the warranty policy.
Information on purchasing extended warranty coverage for the product.
To Next Page