BTS 5K user manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
2. Product Introduction
2.1. Product overview
The BTS 5K battery input and output voltages are high DC voltage. The
system adopts modular design and stacked installation method.The
capacity can be flexibly configured based on actual requirements. The
capacity ranges is 5kWh ~ 30kWh.The BTS 5K battery module is not
recommended to be used alone, it needs to be used with battery
distribution unit (hereinafter referred to as BDU) or ESI series inverter.
The main features are as follows：
Full modular design, easy to install and transport；
Current balance between battery modules, higher battery available
capacity；
Capacity Expansion by Stages；
Low power consumption of battery；
Note:BDU is not a mandatory device for battery use,The following
schematic diagram shows the combination of battery and BUD and
battery and ESI series inverter.
To Next Page
Loading...
Need help?
General
