Sofar solar PowerAll BTS Series User Manual

BTS 5K user manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
28
6. Trouble shooting and
maintenance
6.1. Troubleshooting
This section describes the potential errors for this product. Please read
carefully for the following tips when doing the troubleshooting:
1) For details about the warning or error information displayed on
the BDU(or ESI Series Inverter)status indicator.
2) When the battery generates an alarm or error message, the
alarm report is uploaded to the inverter. You can determine the
cause of battery alarms or faults by viewing the inverter display
or the monitoring system.
3) Perform the following steps to check whether the current
installation status meets the battery operating requirements:
 Is the battery installed in a clean, dry, well-ventilated
location？
 Check whether the battery DC switch is off？
 Check whether the cable section and length meet
requirements？
 Is the wiring good？
 Whether the configuration Settings are correct for the
user's specific installation？
 Whether the communication cable is correctly connected
and is not damaged？

Sofar solar PowerAll BTS Series Specifications

General

Model	PowerAll BTS Series
Category	Inverter
Frequency	50/60 Hz
Cooling Method	Natural convection
Protection Level	IP65
Operating Temperature	-25°C to 60°C
Communication	RS485, Wi-Fi, GPRS