SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
Signs on the inverter
There are some symbols which are related to security on the inverter. Please read
and understand the content of the symbols, and then start the installation.
There is a residual voltage in the inverter! Before opening the
equipment, operator should wait for five minutes to ensure the
capacitor is discharged completely.
Caution, risk of electric shock.
Comply with the Conformite Europeenne (CE) certification.
Please read this manual before install SOFAR 7K~10.5KTLM-G3.
This indicates the degree of protection of the equipment according
to IEC standard 70-1 (EN 60529 June 1997).
Positive pole and negative pole of the input voltage (DC).
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable
Australian standards.
To Next Page
Loading...
