Configuration Overview
59
Online Click this check box to put the intrusion zone online.
C•CURE only monitors online intrusion zones.
Maintenance Mode
(C•CURE 800 only)
Click this checkbox to put the intrusion zone into
Maintenance Mode.
Default: Disabled (unchecked)
NOTE: This check box is not visible if the user does not
have Maintenance Mode privilege.
Disarming Tab Configures the methods for disarming an intrusion zone
locally.
Arming Tab Configures the methods for arming an intrusion zone
locally.
Doors Tab Specifies the doors for the entrance and exit points of
the intrusion zone.
Inputs Tab Specifies the inputs, such as motion detectors, to
assign to the intrusion zone.
Events Tab Specifies events for this intrusion zone that activate
when the zone changes mode.
TABLE 22. Configure Intrusion Zone Dialog Box Field and Tab Descriptions
Field/Tab Description
To Next Page
Loading...
Need help?
General