Software House iSTAR Pro 4U User Manual

1
iSTAR Pro 4U Rack Mount
Quick Start
Installation Guide
Version C4
Document Part Number UM-219
August 2012
OVERVIEW
Software House iSTAR Pro 4U Rack Mount is a standalone, rack-mountable
access control and burglar alarm system unit that houses all the necessary
components to control up to 16 doors, and monitor up to 32 alarm inputs.
Topics
This guide describes quick start installation information for the iSTAR Pro 4U
Rack Mount, including:
 How to wire Doors/Readers to RM ports.
 How to wire Supervised Inputs and Dry Contact Relay Outputs.
 How to wire Lock Power.
 How to wire Mag Lock Power.
 How to wire I/8 and R/8 bus modules.
Features
Software House iSTAR Pro 4U Rack Mount is a standalone, rack-mountable
access control and burglar alarm system unit that houses all the necessary
components to control up to 16 doors and monitor up to 32 alarm inputs. The
device manages power and wiring for access control systems by combining
24V/1A power per lock, separately protected and isolated lock outputs, and
fire interlocks all within the enclosure. Combined with removable wire
connectors that enable quick installation, the iSTAR Pro Rack Mount reduces
the space requirements and costs associated with installing a panel on the wall.
The rack design allows integrators to centrally install and monitor the panel in a
standard depth, 4-post IT rack or a standard 2-post Telco rack, to save valuable
wall space. This efficient design includes two-piece removable rear connectors
for easy field wiring.

Software House iSTAR Pro 4U Specifications

General

Brand	Software House
Model	iSTAR Pro 4U
Category	Racks & Stands
Language	English

Summary

iSTAR Pro Rack Mount Overview and Specifications

System Overview and Features

Standalone rack-mountable access control system with key features and installation topics.

Technical Specifications

Covers physical, electrical, communication, and regulatory specifications.

Installation and Mounting

Rack Mount Size and Requirements

Specifies rack unit size, width, depth, and weight for installation.

Mounting Instructions

Detailed steps for mounting in 4-post IT and 2-post Telco racks.

Network Connection

Guidance for connecting the unit to a network.

System Components and Connections

Key System Components

Descriptions of front panel, rear connectors, GCM, ACM, and power components.

Wiring and Connections

Details on front panel, alarm board, rear panel, reader, lock, and input wiring.

Power Supplies and Battery Backup

Information on power supply units, battery installation, and backup calculations.

APD8 Boards and Troubleshooting

APD8 Board Functionality

Describes the APD8 board's role in power distribution and its features.

APD8 Troubleshooting

Solutions for common APD8 issues like no power or output problems.

GCM and ACM Configuration

GCM Module Configuration

Layout, network setup, diagnostics, and battery management for the GCM.

ACM Module Configuration

ACM overview, reader interface, and control of LEDs and switches.

Burglar Alarm and Intrusion Zone Configuration

Burglar Alarm System Installation

Rack mounting, power requirements, and UL 1076 compliance for alarm systems.

Intrusion Zone Modes and Settings

Descriptions of zone modes, arming/disarming, delays, and input/door configurations.

Protection Inputs and Events

Configuring inputs as protection inputs and setting events for zone status.

Operational Procedures and Status Links

Configuring Status Links

Linking intrusion zone status to events for monitoring and response.

Operational Testing and Maintenance

Procedures for testing inputs/outputs and performing system maintenance.