SolarEdge SE100K User Manual



WARNING!
Upon servicing replacing equipment, instructions in this installation guide must
be followed to maintain the integrity of the PV hazard control system.
SolarEdge commercial optimizers and three phase inverters should only be
replaced with SolarEdge commercial optimizers and inverters. Third party
equipment is not compatible.
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx
16 Photovoltaic Hazard Control Application

SolarEdge SE100K Specifications

General

Max. Efficiency	98.8%
Transformer-less	Yes
Protection Rating	IP65
Frequency	50/60 Hz
AC Output Power	100 kW
Rated AC Power	100, 000 W
Maximum DC Power	135000 W
AC Voltage	400 V
Max. Input Voltage	1000Vdc
Operating Temperature Range	-25°C to 60°C