Chapter 3: Installing the Inverter
Install the inverter either before or after the modules and power optimizers have been
installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it
may damage them. To rest the inverter on the ground, lay it on its back.
Inverter Package Contents
One inverter with DC Safety Unit
Mounting bracket kit
DC Safety Unit sealing cover (if applicable, for use in case of inverter replacement)
Installation guide
Antenna and mounting bracket for wireless communication (in specific models)
Identifying the Inverter
Refer to the sticker on the inverter that specifies its Serial Number and its Electrical
Ratings. Provide the serial number when contacting SolarEdge support. The serial
number is also required when opening a new site in the monitoring platform.
Chapter 3: Installing the Inverter 19
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00540-1.0
To Next Page
Loading...
