SolarEdge SE2500H - Page 72

Technical Specifications - Single Phase Inverters with HD-Wave
Technology (Australia)
Applicable to inverters with part number SEXXXXH-AUXXXBXX4
SE2500H SE3000 SE4000H SE5000H SE6000H SE8000H SE10000H Units
OUTPUT
Rated AC Power Output 2500 3000 4000 4985 6000 8000 10000 VA
Maximum AC Power Output 2500 3000 4000 4985 6000 8000 10000 VA
AC Output Voltage (Nominal) 220 / 230 Vac
AC Output Voltage Range 184 - 264.5 Vac
AC Frequency (Nominal) 50 / 60 ± 5 Hz
Maximum Continuous Output Current 11.5 14 18.5 21.7 27.5 36.5 45.5 A
Max. continuous overcurrent protection 11.5 14 18.5 21.7 27.5 36.5 45.5 A
Residual Current Detector / Residual Current Step
Detector
300 / 30 mA
Inrush current AC (Peak / Duration) 2.8 / 20 3.45 / 20
Aac(rms)
/ ms
Max. output fault current 35 48 80 A
Power factor range 1 (adjustable from -0.9 to +0.9)
Total harmonic distortion < 3 %
Protective class Class I
Utility Monitoring, Islanding Protection, Country
Configurable Thresholds
Yes
Overvoltage category III
Single Phase Inverters with HD-Wave Technology Specifications (Australia) MAN-01-00538-1.0
1