26
5 Equipment Installation
Step 3: Place one battery module on Base
Remove dust cover
1 2
Place battery module
*Note: If the Base is shifted after placing battery module, move it to its original
location according to the mark previously drawn.
Step 4: Secure and tighten M4x14 Phillips-head screws (× 2) on both sides
(Torque: 0.9 to 1.1 N·m)
Right Side View
Torque: 0.9 to 1.1 N·m
Step 5: Repeat the Step 3 and 4 to install the rest of battery modules
Step
4
Place battery modules
To Next Page
Loading...