d) Load
If the inverter is plugged with a smart plug, this status shows the real time
load power, include load1 power and load 2 power.
Load 1 Power
0.0W
Load 2 Power
Load
0.0W
c) EPS
EPS will only have data when the inverter is working in EPS mode, it will show the
real time data of the EPS output such as voltage, current, power, frequency.
EPS
U 220V
I 12A
P 2640VA
Ø
History
● History
The history function contains five items of the information: Inverter yield, EPS yield,
load consume, Meter yield and error logs.
Press up and down to select ,and press “OK” to confirm the selection, press “ESC”
to return to Menu.
a) Inverter Yield
This Inverter Yield contains four items: OutputGridToday, OutputGridTotal,
InputGridToday and InputGridTotal.
Inverter Yield
EPS Yield
Load Consume
History
Setting Setting
46
47
>Load 1 consume
Load 2 consume
Load consume
c) Load consume
The Load consume contains the energy consumed by specific loads by
today and total.
History
Inverter Yield
Error Logs
Meter Yield
Load Consume
EPS Yield
b) EPS Yeild
The EPS Yield function contains EPS yield for today and total.
>Today:
0.0KWH
EPS Yield
>OutputGridToday
0.8KWH
Inverter Yield
To Next Page
Loading...
