10
11
Safety
1.3.2 Explanation of Symbols
Type Approved
Safety
Regular Production
Surveillance
www.tuv.com
ID 1111227431
Battery status
Operating Display
An error has occurred, please inform your installer immediately
Symbols on the Type Label
Symbols on the Inverter
Symbols
TUV certified.
RCM remark.
This section gives an explanation of all the symbols shown on the inverter
and on the type label.
CE mark.
The inverter complies with the requirements of the
applicable CE guidelines.
UKCA mark.
The inverter complies with the requirements of the
applicable UKCA guidelines.
UKNI mark.
The inverter complies with the requirements of the
applicable UKNI guidelines.
The inverter can not be disposed together with the
household waste. Disposal information can be found in the
enclosed documentation.
Do not operate this inverter until it is isolated from battery,
mains and on-site PV generation suppliers.
Danger to life due to high voltage. There is residual voltage
existing in the inverter after powering off, which needs 5 min
to discharge. Wait 5 min before you open the upper lid or
the DC lid.
Beware of hot surface.
The inverter can become hot during operation. Avoid
contact during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
Observe enclosed documentation.
Symbol
To Next Page
Loading...
Need help?
General
