Solid State Logic ORIGIN Installation Guide

ORIGIN Installation Guide
Unpacking and Mounting Hardware
9
Mounting the console on the legs (if supplied)
Ensure that the legs, leg bolts, console are
conveniently located for assembly.
In the diagram on the left the foam base tray
is in position behind the console to provide a
cushioned base to protect the rear of the console
and the floor when fitting the legs.
1
Once the crate is dismantled, the next activity is to remove the console, legs and fixing nuts from the shipping
crate and to mount the console on it's legs. It is suggested that the foam lattice used in the shipping crate is used
to protect the floor and console when fitting the legs
CAUTION: The console weighs approx 150kg (330lb), multiple people and/or lifting supports must be used to
remove the console from the shipping crate.
Lift** the console and gently place it onto its rear.
The console will rest in a near vertical position
on the rear panel heatsinks and the cable tray
mounted on the rear edge.
**The console is heavy! Several strong people
will be needed for this activity.
2

Solid State Logic ORIGIN Specifications

General

Brand	Solid State Logic
Model	ORIGIN
Category	Recording Equipment
Language	English