Solid State Logic ORIGIN Installation Guide

ORIGIN Installation Guide
Safety And Regulations
3
Physical Safety
The console surface is too heavy for one person to move; ensure sufficient manpower is available when positioning
the console and any associated IO or peripheral equipment.
If the console trim is removed for any reason then there may be sharp edges exposed on the frame metalwork.
Environmental
Evaluation of apparatus based on altitude not exceeding 2000m. There may be some potential safety hazard if the
apparatus is operated at altitude exceeding 2000m.
Evaluation of apparatus based on temperate climate conditions only. There may be some potential safety hazard
if the apparatus is operated in tropical climate conditions.
Tools
Origin is supplied with a pair of T-handle Module Pullers (SSL Part #53911152A) and a 2mm Allen Key to aide with maintenance of the channel
strips. Other tools that may be needed for installation are an 8mm Metric (M8) spanner/socket or adjustable spanner to attach the legs.
If there is a need to remove the end trim of the console, a #2 Pozidriv screwdriver will be needed for the front buffer/armrest to end
trim screws.

Solid State Logic ORIGIN Specifications

General

Brand	Solid State Logic
Model	ORIGIN
Category	Recording Equipment
Language	English