Solid State Logic ORIGIN Installation Guide

Visit SSL at:
www.solidstatelogic.com
© Solid State Logic
All rights reserved under International and Pan-American Copyright Conventions
SSL
®
and Solid State Logic
®
are ® registered trademarks of Solid State Logic.
ORIGIN™, SuperAnalogue™, VHD™ and PureDrive™ are trademarks of Solid State Logic.
All other product names and trademarks are the property of their respective owners and are hereby acknowledged.
No part of this publication may be reproduced in any form or by any means, whether mechanical or electronic,without the written
permission of Solid State Logic, Oxford, OX5 1RU, England.
As research and development is a continual process, Solid State Logic reserves the right to change the features and
specifications described herein without notice or obligation.
Solid State Logic cannot be held responsible for any loss or damage arising directly or indirectly from any error or omission in
this manual.
PLEASE READ ALL INSTRUCTIONS, PAY SPECIAL HEED TO SAFETY WARNINGS.
E&OE
May 2020
Revision History
Revision V1.0 - January 2020 - Initial Release
Revision V1.1 - February 2020 - First Minor Revision Release
Revision V1.2 - May 2020 - Correction of Leg Fixing Detail

Solid State Logic ORIGIN Specifications

General

Brand	Solid State Logic
Model	ORIGIN
Category	Recording Equipment
Language	English