Solid State Logic SiX User Manual

SiX User Guide
Detailed Description
6
Channel EQ
The channel EQ on SiX has its roots in SSL’s classic E series EQ. It is a gentle, broad stroke two-band
design with high and low shelving lters at 3.5 kHz and 60 Hz, adjustable from +15 dB to -15 dB of gain.
Each band can be independently switched between shelving and bell curves using the BELL switch - a
feature found on many SSL EQ designs. A useful feature of the bell curves is that they change centre
frequency to operate at 5 kHz and 200 Hz giving greater versatility from the two controls.
The EQ is switched 'in' circuit or completely bypassed using the ‘IN’ switch. This small detail guarantees
no inuence on the channel’s exceptionally at frequency response from the tolerance of the EQ control
centre detent positions.
EQ HF Frequency Response
EQ LF Frequency Response

Solid State Logic SiX Specifications

General

Type	Analog Mixer
Channels	6
EQ	2-band Channel EQ
Compressor	Yes, on Mono Channels
Talkback	Yes
EQ Bands	2
Aux Sends	2
Bus Compressor	Yes, on Main Mix Bus
Phantom Power	48V
Headphone Output	2
Monitor Output	2
Main Output	2
USB Audio Interface	2x2 USB Interface