26
Operator Manual
V. To avoid rear overturns
WARNING : Hitching to the rear axle, or
any other point above the swinging
drawbar, can cause a rear overturn.
DO NOT pull anything using the top link
connection, or from any point above the centre
line of the rear axle. Always use an approved
drawbar, and only use a drawbar pin that
locks into place.
High hitching can cause rear overturn, which
may cause serious injury or death. Hitch loads
to the drawbar only.
When using a three-point linkage drawbar, the
stays must be fitted and kept in the down
position.
Use front counterweights to increase tractor
stability when towing a heavy load or to counter
balance a heavy rear mounted implement
DO NOT overload your tractor and DO NOT
ballast it beyond its carrying capacity. Never
add ballast weight to counterbalance an
overload. Reduce the load instead.
WARNING : An overload is always
dangerous. Check the loading capacity
of your tractor and NEVER overload
To Next Page
Loading...
