71
Operator Manual
Gate valve: - Turn off the gate valve when you are not using the trailer
Palm coupling: - Make sure that the washer is clean and undamaged when connection
is made. After that check the connection for proper seal.
Check points:- Check out the air leakage at specific joints,if present contact your
authorized service station.
Air leakage in braking circuit will lead to unbalanced brakes and tyres wears out quickly.
Note:-
Make sure that before operating the trailer brake runs the engine idle for at least 15 minutes. Unloading valve is used to set the
required pressure do not temper with it, on finding some disturbance contact your authorized service station.
To Next Page
Loading...
