17
Chapter 2 Hardware Setup
2-1 CPU Installation
2-2 MEMORY Installation
2-3 AGP PRO Installation
2-4 HDD/FDD Installation
2-5 BUS Clock Select
2-6 Jumper Setting For Devices On Boards
2-7 Connectors Configuration
ATTENTION !!!
1. Please refer to your processor installation or other
documentation attached to your CPU for more detailed
installing instruction.
2. Installing a heat sink and cooling fan is necessary for
proper heat dissipation from your CPU. Incorrect in-
stallation may result in overheating and damage of
your CPU.
3. Before changing the setting of CPU Vcore from BIOS
program, user SHOULD make sure of correct specifi-
cation both of CPU CLOCK and RATIO. Incorrect set-
ting may cause damage to your CPU.
This chapter contains the following topics :
Chapter 2
Hardware Setup
To Next Page
Loading...
