Chapter 4 BIOS Setup
85
Run the “Frequency/Voltage Control” as following:
1. Choose “Frequency/Voltage Control” from the Main Menu and a screen
with a list of options will appear:
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys.
<F1>: “Help” gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
4-6.9 Frequency/Voltage Control
Auto Overclocker
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
Linear Spread Model
Linear Spread Range
CPU Skew Adjust
PCI Skew Adjust
SDRAM Skew Adjust
AGP Skew Adjust
CPU Host/PCI Clock
CPU Clock Ratio
Press Enter
Enabled
Disabled
3
0
Disabled
Disabled
Disabled
Disabled
100/33MHz
x3
Item Help
Menu Level
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Frequency Control
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
